ELCON-POWER-CABLE-ACC1
  • Italiano
  • English

HomeProductsSTANDARD

Showing 1–16 of 34 results

Category
Accessory
Application
1
Armouring
Cablecore
Cableshield
Insulation
Product Type
Technology
Voltage
Clear filters
Application : STANDARD
Clear filters
Filters Sort results
Product
Description
ECOLD GLS3689FC
All in one joint with integrated stress control

Series ECOLD GLS–3689FC is the Elcon Megarad
range of pre-expanded cold-shrinkable joints with
electrical stress control components integrated in the
body.
All the joint body components are pre-assembled at
factory on just one carrier tube: Faraday cage,
electrical stress control element, insulation, copper
mesh, outer protection.
Installation is completed just by pulling the spiral.
Installations are fast and easy and mistakes risks
are reduced.

ECOLD STEI 24
PUSH-ON termination

ECOLD STEI is Elcon Megarad range of push-on
termination for indoor connections of polymeric
insulated cables up to 24 kV.
The installation is very easy and fast:
no heating, no special tools, no carrier tube removal.
The electrical eld stress control is achieved by means of the
Elcon Megarad specially formulated high permittivity tape.
The insulator is made of one piece molded anti-tracking
silicone rubber.

Compliant with standards HD 629.1 S2, CEI 2062/1.

ECOLD TEC 98
Outdoor termination for 1 core cable The kit consists of oil barrier element, stress control element, cold-shrink anti-tracking bodies and rain sheds. Compliant with standards CENELEC HD 629.2 S2, CEI 20-62/2

Terminali da esterno per cavi unipolari

Il corredo è composto da un elemento per il contenimento della miscela isolante, un elemento di controllo campo elettrico, guaine autoretraibili antitraccia e campane isolanti autoretraibili, ove previste.

Conforme a norme CENELEC HD 629.2 S2, CEI 20-62/2

ECOLD TES 64
Outdoor termination for 1 core cable with wire or Al tube screen The kit consists of stress control element, cold-shrink anti-tracking bodies and rain sheds. Compliant with standards CENELEC HD 629.1 S2, CEI 20-62/1

Terminali da esterno per cavi unipolari - schermo fili o tubo Al

Il corredo è composto da un elemento di controllo campo elettrico, guaine autoretraibili antitraccia e campane isolanti autoretraibili.

Conforme a norme CENELEC HD 629.1 S2, CEI 20-62/1

ECOLD TES 72
Outdoor termination for 1 core cable with wire screen

The kit consists of stress control element, cold-shrink anti-tracking bodies and rain sheds.

Compliant with standards CENELEC HD 629.1 S2, CEI 20-62/1

Terminali da esterno per cavi unipolari - schermo fili

Il corredo è composto da un elemento di controllo campo elettrico, guaine autoretraibili antitraccia e campane isolanti autoretraibili.

Conforme a norme CENELEC HD 629.1 S2, CEI 20-62/1

ECOLD TIC 54E
Indoor termination for 3 core (armoured or non armoured) BELTED (non- radial field) cable

The kit consists of an oil barrier element, stress control element, cold-shrink anti-tracking bodies and semiconductive breakout.

Compliant with standards CENELEC HD 629.2 S2, CEI 20-62/2

Terminali da interno per cavi tripolari (armati o non armati) tipo CINTURATO (campo non radiale)

Il corredo è composto da un elemento per il contenimento della miscela isolante, elementi di controllo campo elettrico, triforcazione semiconduttiva e guaine antitraccia autoretraibili.

Conforme a norme CENELEC HD 629.2 S2, CEI 20-62/2

ECOLD TIC 97
Indoor termination for 1 core cable

The kit consists of oil barrier element, stress control element, cold-shrink anti-tracking bodies as well as cold-shrink rain sheds where indicated.

Compliant with standards CENELEC HD 629.2 S2, CEI 20-62/2

Terminali da interno per cavi unipolari

Il corredo è composto da un elemento per il contenimento della miscela isolante, un elemento di controllo campo elettrico, guaine autoretraibili antitraccia e campane isolanti autoretraibili, ove previste.

Conforme a norme CENELEC HD 629.2 S2, CEI 20-62/2

ECOLD TIS 63
Indoor termination for1 core cable with wire or Al tube screen

The kit consists of stress control element, cold-shrink anti-tracking bodies as well as cold-shrink rain sheds where indicated.

Compliant with standards CENELEC HD 629.1 S2, CEI 20-62/1

Terminali da interno per cavi unipolari - schermo fili o tubo Al

Il corredo è composto da un elemento di controllo campo elettrico, guaine autoretraibili antitraccia e campane isolanti autoretraibili, ove previste.

Conforme a norme CENELEC HD 629.1 S2, CEI 20-62/1

ECOLD TIS 73
Indoor termination for 1 core cable with wire screen

The kit consists of stress control element, cold-shrink anti-tracking body as well as cold- shrink rain sheds where indicated. Also available in a shorter version with uncovered lugs for voltages up to 24 kV (type TIS 73F).

Compliant with standards CENELEC HD 629.1 S2, CEI 2062/1

Terminali da interno per cavi unipolari - schermo fili

Il corredo è composto da un elemento di controllo campo elettrico, guaine autoretraibili antitraccia e campane isolanti autoretraibili, ove previste. L’accessorio è disponibile anche in versione “ridotta” con capicorda scoperto (tensione massima 24 kV - tipo TIS 73F).

Conforme a norme CENELEC HD 629.1 S2, CEI 2062/1

ECOLD VTC
1 2 4